Custom Dental Whitening Tray 

🕢 [ Fill out the form and we will respond within 30 minutes! ]

Practitioner-submitted cases only. Custom-fabricated by ASD Dental Lab, an in-house full-service dental laboratory in Shenzhen and Huizhou, China — serving dental practices, group clinics and fellow dental laboratories in the United States, the Netherlands, Germany, France, Belgium, Austria, the United Kingdom, Luxembourg and Switzerland.

Custom Dental Whitening Trays: Specifications 

SpecDetail
Product typeCustom dental whitening tray / custom teeth whitening tray / custom bleaching tray (vacuum- or pressure-formed dental appliance)
IndicationTake-home dental bleaching — holds professional take-home whitening gel against the dentition
Fabrication sourceEach tray is fabricated from the patient’s own impression or intraoral scan
MaterialClear EVA (ethylene-vinyl acetate) sheet; standard 0.5–0.8 mm / 0.020–0.030 in
Available gauges0.5 mm · 0.8 mm · 1.0 mm · thicker sheets for night / parafunctional use
MarginScalloped, finished along the gingival margin
ReservoirOptional, per prescribing dentist’s prescription
Accepted impressionsAlginate · PVS / VPS · poured or un-poured
Accepted digital scansSTL · PLY · OBJ (3Shape TRIOS, iTero, Medit, Primescan, CEREC)
Pack-outRigid storage case · printed patient instruction sheet · lab case-label with lot ID
Standard turnaround5–7 working days from receipt of a usable impression or scan
Lab locationShenzhen + Huizhou, China (in-house production, no third-party outsourcing)
Service marketsUS · NL · DE · FR · BE · AT · UK · LU · CH

1. Custom Teeth Whitening Trays Overview

A custom dental whitening tray is a thin, clear dental appliance vacuum- or pressure-formed over a model of the patient’s own dentition. Custom dental whitening trays are designed to hold a bleaching gel against each tooth surface for a defined wear time, then are removed, rinsed and stored between uses. They are reusable across a full whitening course and subsequent touch-ups.

Custom dental whitening trays vs. stock trays

  • Custom dental whitening tray — fabricated from the patient’s own impression or scan, by a dental technician, in a dental laboratory.
  • Prefilled disposable tray — factory-made, pre-loaded, single-use, one-size, no adaptation.
  • Boil-and-bite tray — thermoplastic blank the patient softens in hot water and bites into; semi-custom at best, no clinical model.

The American Dental Association distinguishes custom trays from OTC options in its patient-facing overview (ADA — Teeth Whitening). A laboratory-fabricated custom tray made from the patient’s own impression or scan, trimmed to the gingival margin, holds gel where it needs to be and keeps it off the soft tissue — unlike a generic tray that depends on the patient biting it into shape (Colgate).

For practices that already dispense take-home whitening, switching from a stock or boil-and-bite tray to a custom-fabricated tray is the single biggest change in patient experience — and it is the change the patient cannot make for themselves. For practices that dispense custom teeth whitening trays regularly, the consistency and clinical control are transformative.

2. Product features

2.1 Patient-specific anatomy

Every custom dental whitening tray is fabricated from an impression or a digital intraoral scan submitted by the prescribing practice. One impression, one model, one tray — no generic blanks, no reuse of a previous patient’s model.

2.2 Scalloped gingival margin

Trimmed along the gingival margin with hand instruments. The scalloped margin follows each tooth’s contour, covers the full clinical crown without leaving the incisal edge uncovered, and sits close to (but not over) the gumline so gel stays on enamel.

2.3 Compatible with prescribed gel systems

Designed for use with established professional take-home gel systems — 10–35% carbamide peroxide or hydrogen peroxide, dispensed under the prescribing dentist’s direction. The tray is the delivery vehicle; the gel concentration and wear time are the clinical decision (MouthHealthy — Teeth Whitening).

2.4 Reusable across the full whitening course

A properly made custom bleaching tray is durable for a full whitening course plus touch-ups over months to years, with normal storage in its case. This is the practical difference from prefilled trays, which are single-use by design.

2.5 Packaged for clinical handoff

Each case ships with: the tray (or tray pair) in a rigid storage case · printed patient instruction sheet · lab case-label with lot reference · optional accessories on request (extra case, desensitizing-gel sample).

Tray material and bleaching-gel regulation are separate issues. ISO 28399 addresses external tooth-bleaching products but expressly excludes tray materials and devices (ISO 28399:2021 scope).

3. Why practices and partner labs choose us

Decision pointASD Dental Lab
Production modelIn-house full-service dental lab — no third-party outsourcing
Tray scopeCustom dental whitening trays, custom teeth whitening trays, custom bleaching trays
Edge consistencyDedicated trimming technician per case; consistent scalloped margin
Impression / scan intakePhysical impression or STL / PLY / OBJ digital scan
Block-out & reservoirDefault thin uniform block-out; no-reservoir option on request
Material traceabilitySheet lot recorded per case
Remake policyLab-fault remake at no charge
CommunicationDirect lab relationship — no middleman
Lab size~460-person team across CAD, milling, implant, ceramic & metal, removable, QC, CS

3.1 Edge quality at scale

In-office fabrication works for occasional cases. For practices dispensing take-home whitening weekly, the bottleneck is the hand-trimming and finishing of the tray margin — the step that determines whether the tray covers the whole tooth and stays off the gingiva. A dedicated trimming technician produces the same edge, case after case.

3.2 Impression or scan — we handle the rest

The prescribing practice sends a physical impression (alginate · PVS / VPS) or a digital intraoral scan (STL / PLY / OBJ). The lab pours (if needed), blocks out, thermoforms, trims, finishes, QCs and ships. Chair time is reduced to the impression appointment and the dispense appointment.

3.3 Lot-traceable

Every tray carries an internal lot reference. Any tray we ship can be traced back to the trimming technician, the sheet lot, and the originating case.

3.4 Remake policy

If the impression we receive is unclear at the margin, distorted in transit, or will not yield a usable tray, we do not fabricate a poor tray and hope — we contact the practice before proceeding. If a tray we deliver fails clinically for a reason on our side (poor margin, poor adaptation, material defect), we remake it at no charge.

3.5 Direct lab relationship

ASD Dental Lab is the manufacturer. Founded 2012. Two production facilities — Shenzhen and Huizhou, China. In-house team of approximately 460 across CAD design, milling, implant, ceramic and metal, removable denture, quality control, sales and customer service. No cases are outsourced to third-party laboratories. Active clinician base includes more than 50 dental laboratories, more than 100 dental clinics and over 400 dentists across the United States and Europe (International Service — ASD Dental Lab company profile). Factory visits and video factory audits are welcome.

4. Custom Whitening Tray Manufacturing Process

4.1 Step 1 — Impression or scan receipt

Accept physical impressions (alginate · PVS / VPS) poured or un-poured, or digital intraoral scans (STL / PLY / OBJ) from 3Shape TRIOS, iTero, Medit, Primescan, CEREC. Alginate impressions should be poured promptly — alginate distorts over time.

4.2 Step 2 — Model fabrication

Physical impressions poured in dental stone. Digital scans 3D-printed in validated dental resin. Output: a dimensionally accurate reproduction of the patient’s dentition and gingival margins.

4.3 Step 3 — Block-out and reservoir design

A thin layer of block-out resin (or light-cured composite spacer) is placed over the labial surfaces on the model to create the gel reservoir. Default: thin uniform block-out. Optional: no-reservoir design for simpler cases — per prescribing dentist’s prescription.

4.4 Step 4 — Thermoforming

Clear EVA sheet formed over the blocked-out model on a vacuum or positive-pressure thermoforming machine.

Patient profileSheet gauge
Standard take-home whitening0.5–0.8 mm / 0.020–0.030 in
Bruxers / robust appliance preference1.0 mm / 0.040 in
Nightguard-style overnight wear · parafunctional patientsThicker sheets

Sof-Tray-style sheets in regular, medium and heavy gauges are the typical reference set across the professional dental supply industry; choose the gauge based on patient history rather than brand (Ultradent Sof-Tray product reference).

4.5 Step 5 — Trimming and finishing

Trimmed along the gingival margin — a scalloped margin following each tooth’s contour. Finished with hand instruments; no laser-cut or rough edges. The tray covers the tooth from just above the incisal edge to the gingival margin, with no over-extension onto soft tissue.

4.6 Step 6 — QC, packaging and shipment

Each tray inspected for margin quality, adaptation, occlusal clearance, absence of voids or thin spots. Internal QC failures are re-fabricated, not shipped. Approved trays packed in a rigid storage case with printed patient instruction sheet and lab case-label.

5. Custom Bleaching Trays and the Alternatives

FeatureCustom laboratory trayPrefilled disposable trayBoil-and-bite tray
FitPatient-specific impression or scanFactory universalPatient-adapted in hot water
Gel reservoirPer prescribing dentist’s prescriptionFactory-filled, single-useNone
ReusabilityMonths to yearsSingle useLimited; distorts
Gel choiceAny professional take-home gelFixed by manufacturerPatient-added
IndicationFull take-home whitening courseOne-time boost or trialConsumer OTC
Regulatory framingCustom dental appliance (US FDA framework for custom-fabricated dental appliances)OTC consumer productOTC consumer product

For a practice dispensing professional take-home whitening with a defined gel protocol and predictable patient experience, the custom laboratory tray is the standard of care. Prefilled trays are useful for a one-time boost; boil-and-bite trays are OTC consumer products — neither replaces a lab-fabricated custom dental whitening tray for a full whitening course.

The American Dental Association distinguishes custom trays from OTC options in its patient-facing overview (ADA — Teeth Whitening). ISO 28399 explicitly excludes auxiliary materials such as tray materials from its scope — the tray itself is not regulated as a bleaching product (ISO 28399:2021).

6. How to send a case

6.1 What the practice sends

  1. Impression or scan — alginate · PVS · STL/PLY/OBJ. Include upper and lower arches in occlusion when ordering both.
  2. Case sheet / lab slip — patient identifier · arches required (upper / lower / both) · tray design (reservoir yes/no, margin style, sheet thickness) · special instructions.
  3. Gel specification — the gel system the patient will be using, for tray-fit guidance.

6.2 What the lab returns

  • Custom dental whitening tray (or upper + lower pair) in a rigid storage case
  • Printed patient instruction sheet
  • Lab case-label with lot reference
  • On request: extra storage case · desensitizing-gel sample · duplicate trays

6.3 Turnaround

Standard turnaround: 5–7 working days from receipt of a usable impression or scan for custom teeth whitening trays and custom bleaching trays. Receipt of every case is acknowledged by the next working day. Unusable impressions are held and reported back before any fabrication begins.

6.4 Shipping

Tracked courier. US, EU and UK served from Shenzhen and Huizhou 

7. Compliance — what we claim and what we do not

What we do not claim:

  • Medical or therapeutic claims about whitening outcomes — the whitening decision and protocol are clinical judgments of the prescribing dentist.
  • Specific shade outcomes — shade change is a function of the gel, protocol, starting shade, and patient compliance.
  • Sterile or single-use medical-device status — the trays are custom-fabricated dental appliances for repeated intraoral use by a single identified patient under dental professional supervision.
  • Comparative ranking against other suppliers — what we offer is our specific combination of in-house production, lot traceability, remake policy, and direct lab relationship.

What we do claim, and stand behind:

  • The tray is fabricated from the patient’s own impression or scan.
  • The margin is trimmed to follow the gingival contour, not cut straight across.
  • The tray is inspected before shipment — internal QC failures are re-made, not shipped.
  • The case is lot-traceable internally — technician, sheet lot, and case identifiable for every tray.
  • If a tray we deliver fails for a reason on our side, we remake it at no charge.

8. Custom Dental Whitening Trays FAQs

What is a custom dental whitening tray?

A custom dental whitening tray is a thin, clear dental appliance fabricated from the patient’s own impression or intraoral scan, designed to hold a bleaching gel against the teeth for a defined wear time. Custom teeth whitening trays are trimmed along the gingival margin so the gel stays on enamel and away from soft tissue. Custom bleaching trays are reusable across a full whitening course and touch-ups.

How is a custom dental whitening tray different from a prefilled or boil-and-bite tray?

A prefilled tray is a factory-made disposable tray pre-loaded with gel — single-use, one-size, no adaptation. A boil-and-bite tray is a thermoplastic blank the patient softens in hot water and bites into — semi-custom at best. A custom dental whitening tray is fabricated by a dental technician from the patient’s own model, in a dental laboratory (ADA).

What material are the trays made from?

Clear EVA (ethylene-vinyl acetate). Thermoformed over a blocked-out model using vacuum or positive-pressure forming. Standard 0.5–0.8 mm; thicker gauges for parafunctional patients. Other dental thermoplastics are available on request.

Which bleaching gel can the tray be used with?

Professional take-home whitening gels — typically 10–35% carbamide peroxide or hydrogen peroxide. The tray holds whatever gel the practice specifies.

What if the impression we send is not usable?

The lab does not fabricate a poor tray and hope for the best. If the impression is distorted, the margins unclear, or the scan incomplete, the lab contacts the practice and holds the case until a usable input is received.

Do you accept digital intraoral scans?

Yes. STL, PLY, OBJ. Scanners: 3Shape TRIOS, iTero, Medit, Primescan, CEREC. File + case sheet → receipt acknowledged by the next working day.

How long does a custom tray last?

Months to years — a full whitening course plus touch-ups, with normal care (case storage, no heat distortion, rinse after use).

Will the tray whiten crowns, veneers, or composite restorations?

No. Tray-delivered bleaching gel whitens natural tooth structure only; restorations do not change shade.

Do you supply whitening gel?

No. The lab fabricates trays; partner practices dispense their own professional whitening gel under their clinical direction.

9. Send a case

Custom dental whitening trays · custom teeth whitening trays · custom bleaching trays. Send the impression or scan with a case sheet and the lab will confirm receipt by the next working day.

For block-out thickness, margin style, sheet thickness, turnaround, or general enquiries before sending a case — the lab is reachable directly.

Experience faster turnaround times with our cutting-edge technology

Experience faster turnaround times with our cutting-edge technology