Custom Night Guards & Dental Lab Mouth Guards — Made by ASD Dental Lab

Whether you need a night guard for teeth grinding, a custom mouth guard for sports, or a lab-made occlusal splint to help with jaw strain — you want something that actually does its job at night, when no one’s watching.

Custom Mouth Guards We Make

Hard Night Guards

The workhorse for heavy grinders and patients with TMJ strain. A dentist sends the upper/lower impression, the bite record, and the target jaw position. We design and fabricate a hard, flat-plane splint that holds the patient’s bite open and lets the jaw muscles rest.

Soft Night Guards

For light-to-moderate clenching, post-orthodontic patients, and patients who can’t tolerate a rigid appliance. Made from a softer thermoplastic; same custom-fit workflow.

Hard Outside, Soft Inside

A hybrid. The patient gets the comfort of a soft inner surface against the teeth and the durability of a hard outer surface. Common for moderate-to-heavy bruxism where a pure soft guard would wear through in months.

Periodontal Splints and Bite Splints

For patients who need short-term tooth stabilization, post-trauma protection, or a diagnostic bite plane before restorative work.

Custom Sports Mouth Guards

Built from a dental impression or scan of the athlete’s teeth, not from a generic boil-and-bite. Far better retention, far less gag, better protection against direct trauma.

Retainers (Hawley, Essix, bonded lingual)

Same lab, same QC process. Hawley retainers with acrylic and labial bow; vacuum-formed Essix retainers; bonded lingual retainers fabricated to the doctor’s wire-arch clearance spec.

How a Night Guard Order Flows Through the Dental Lab

  1. Case arrives. Upper and lower model or intraoral scan (.STL), bite registration, and prescription.
  2. Case review. A coordinator checks the records against the prescription, flags anything missing, and confirms target arch and material.
  3. CAD design. A CAD technician sets the model’s digital base, marks undercuts, plans block-out, and checks bite clearance.
  4. Production. Depending on the prescription: 3D print the model, vacuum-form the sheet on it, trim and finish; or mill a PMMA disc, then hand-finish. Thermoforming units use controlled heating, controlled vacuum, and controlled cooling — heat evenly, hold pressure steady, cool evenly before demolding.
  5. Fit check on the model. Retention, extension, occlusion, and margin smoothing — on the actual working model, not just by eye.
  6. Cleaning and packaging. High-pressure cleaning, patient ID verified against the work order, individually sealed with patient marking.
  7. Ship. Packed and shipped to your office or your lab.

Each stage is handled inside ASD — design, model printing, milling or forming, trimming, QC, packaging. Nothing is sent out to a third-party lab.

Materials and Equipment for Custom Night Guards and Mouth Guards

  • Sheet stock. Medical-grade EVA and hard acrylic thermoplastic for vacuum-formed night guards; thicknesses chosen per prescription.
  • Milling stock. PMMA disc for milled splints when the prescription calls for it.
  • 3D printers. Dental-grade printers for working models and diagnostic wax-ups.
  • Milling machines. 5-axis dental mills for PMMA and zirconia work.

If your office needs a specific material brand or biocompatibility cert on file for a particular case, we can route that through the work order before production starts.

Materials and Equipment for Custom Night Guards and Mouth Guards

Quality Control on Every Night Guard and Mouth Guard

Every night guard and mouth guard goes through the same QC checks, regardless of the order size.

  • Thickness. Spot-checked with calipers at the occlusal and incisal areas against the prescription.
  • Edges. Run a finger around the full periphery. No sharp margins, no lifted edges, no flashing.
  • Retention. Try on the working model. The guard should seat with positive engagement and lift off with deliberate pull — not fall off, not require force.
  • Occlusion. Confirm the bite contacts and the target arch relationship match the prescription.
  • Surface. No cracks, no bubbles, no visible voids under standard light.

The dentist’s prescription is the reference. If a measurement is off or a margin feels off, it goes back to the technician — not out the door.

Quality Control on Every Night Guard and Mouth Guard

Turnaround for Night Guards and Dental Lab Mouth Guards

  • Routine cases. Most custom night guards, soft guards, dual-laminate guards, sports mouth guards, and retainers finish in 2 to 3 days in-lab once records check out, then ship.
  • Complex cases. Hard occlusal splints with full arch setup, milled PMMA appliances, and multi-stage clear-aligner-style retainer sets run 5 to 7 days in-lab.
  • Bulk sports guard orders. Quoted per batch.

For exact turnaround on your case, tell us what you’re ordering and where it’s shipping. We’ll give you a real number, not a generic range.

Turnaround for Night Guards and Dental Lab Mouth Guards

What to Send with a Night Guard or Mouth Guard Case

The lab can only build to what’s on the prescription. To get a custom-fit night guard back on the first pass, send:

  • Upper and lower model or digital intraoral scan
  • Bite record (or a note if you want us to set up on an articulator against the prescription)
  • Material and thickness preference
  • Target arch (upper or lower)
  • Patient ID on the work order

If anything’s missing, a coordinator will flag it before production starts. We’d rather ask one extra question than guess on a splint.

What to Send with a Night Guard or Mouth Guard Case

Certifications and Compliance for Our Dental lab

ASD operates to internationally recognized quality and safety benchmarks so dentists, clinics, and partner labs can hand us a prescription without second-guessing the paperwork behind it.

Why Dental Clinics and Partner Labs Pick Us as Their Dental Lab

The reason offices switch from a middleman to a direct lab isn’t price. It’s consistency, communication, QC transparency, and the fact that the same team handles every step in one facility. ASD runs the case from receipt to shipping in one facility. Same team, same QC system, same documentation chain.

About ASD Dental Lab

ASD is a full-service dental laboratory founded in 2012. We are a direct manufacturer, not a middleman.

Our facilities are located in China, with manufacturing operations in Shenzhen and Huizhou. We run the full in-house workflow — case intake, CAD design, model 3D printing, CAM milling, zirconia and ceramic processing, finishing, QC, packaging, and shipping.

Team size runs roughly 460 professionals across CAD design, milling, implant, ceramic and metal, removable, quality control, and case coordination, plus trained backup workers for peak-season capacity.

We’ve served more than 50 dental laboratories, 100+ dental clinics, and 400+ dentists, with active service into the United States, the United Kingdom, Germany, France, the Netherlands, Belgium, Austria, Luxembourg, Switzerland, and other European markets.

We work with dental clinics, group practices, DSOs, and outsourcing dental labs on flexible cooperation — single-case orders, retainer programs, overflow capacity for partner labs, and bulk orders for sports programs.

3D Dental Lab Advanced Equipment

Factory Tour for Partner Dental Labs and Clinics

Dentists, clinic owners, and partner lab directors can visit the facilities in Shenzhen and Huizhou. We arrange:

  • On-site factory tours and production line walk-throughs
  • Video factory inspections for offices that can’t travel
  • Capability and capacity discussions for larger partnerships

If you’re evaluating us for an ongoing partnership, a video tour is usually the fastest way to see what the workflow actually looks like.

3D Dental Lab Factory Tour

Experience faster turnaround times with our cutting-edge technology

FAQs

A night guard is built for nighttime wear — it protects the teeth from grinding and clenching and helps the jaw muscles rest. A mouth guard is built for impact — it absorbs shock during sports. Both are custom-fit when they come from a dental lab, but they’re built for different jobs.

They’re different products for different situations. A custom-fit guard is made from the patient’s own impression or scan, with the best retention, the best protection, and the thinnest profile possible at the bite — designed for ongoing nightly wear or repeated athletic use. A boil-and-bite is shaped at home by softening in hot water and is fine for a one-off game, not great for nightly bruxism. A stock guard is pre-formed and one-size, the least protective option.

Either works. We accept physical impressions and digital intraoral scans (.STL). If you’re sending a scan, please include the bite record and prescription in the same package.

We rework. If the issue is on our side — thickness off, margins rough, retention off — we remake it. If the issue traces back to the impression or bite record, we’ll tell you what we found so the next case is clean.

We can, but the prescription and material decision sits with the dentist. For pediatric patients the appliance design follows the same workflow as adults but with materials and thicknesses appropriate to a growing dentition.

Each retainer stage is sealed in its own bag marked with the step number, so a stage-3 bag can never end up at the stage-2 chairside pickup. Work orders carry the patient ID from intake through shipping, and every technician handoff reads the same ID before the case moves to the next station.

ISO 13485 certificate, CE marking, FDA registration, MDR (EU 2017/745) compliance documentation, and material biocompatibility sheets are all available on request — sent to your compliance team before the first case ships if you’d like.

Latest from Blog

Explore dentistry trends, dental lab insights, digital dentistry updates, and tips for dentists on implants, crowns, restorations, and dental technology.

Experience faster turnaround times with our cutting-edge technology